idrac ip,国外vps下载,如何租云主机,vps服务器租用和云安全,vps 服务器推荐

🗣 Wd提问: idrac ip

🤖 Ai回答:
To access the iDRAC (Integrated Dell Remote Access Controller) interface of a Dell server, you need to know the iDRAC IP address、Here’s how you can find or set the iDRAC IP address:

1、Using the iDRAC Web Interface:
Power on the server and press `F2` during boot to enter the BIOS/UEFI setup.
Navigate to the System Information section and look for the iDRAC settings.
Note down the iDRAC IP address.

2、Using the Command Line:
If you have physical access to the server, you can use the command line to check the iDRAC IP address:
Press `Ctrl+E` during POST to enter the iDRAC Quick Sync utility.
Select View IP Address to display the current iDRAC IP configuration.

3、Using Network Tools:
If you have network access to the server, you can use tools like `ping`, `arp`, or `nmap` to scan the network for the iDRAC IP address.

4、Setting a Static iDRAC IP Address:
Once you have access to the iDRAC web interface, you can set a static IP address by following these steps:
Go to the iDRAC web interface (e.g., `https://<iDRAC_IP/`) using a web browser.
Log in with the default credentials (usually `root` with a password specified during installation).
Navigate to the Networking or Network Configuration section.
Set the iDRAC IP address, subnet mask, gateway, and DNS servers as needed.

Default Credentials:
Username: `root`
Password: The password you set during initial setup or the default password provided by Dell.

If you need further assistance or troubleshooting, please let me know!

Ai作答

📣 商家广告：